Home | Mailing List | Specifications | Care and Feeding | Modifications | Vendors | Literature

 

Valve Shims

Date 2/4/08


Saw this tonight on SHOFORUM in a post by Paul Nimz.

This needs to be on the V8SHO.com site. Not perfect - no tiny little hole like the V8 SHO shim, but should work well enough if one is performing a valve adjustment and can't obtain good used ones. Full size range is very appealing too.

http://www.dual-star.com/index2/Brand/Kawasaki/klr%20650%20valve%20shims.htm

Thank You Paul. :-)

--
Eric Lehmann


Yup, we've known for quite some time about the KLR650 shims as a x-ref  for the V6 shims as well:
http://www.wikisho.com/wiki/index.php/Valve_Shims_from_Motorcycles

Regards,
Jon Heese


Regarding the absence of a hole...

I would bet a hard drive magnet on a stick would remove the shims....

Scott


Contact Information

ęCopyright  2000 - 2008; all rights reserved by V8SHO